Skip to main content

Runaway Erosion

Runaway Erosion

Western Cape rivers are generally degraded and unstable, said Western Cape Department of Agriculture’s (DoA’s) Hans King.
He explained that this was caused by the flourishing invasive alien plant species in rivers, the disappearance of indigenous riverine plants, the narrowing of river channels, owing to developments in the flood plains, and the bulldozing of river beds by landowners.
King was one of the speakers at the International Erosion Control Association Southern Africa Chapter conference, recently held in George, in the Western Cape province.
He said that a clear dynamic of the rivers is the knock-on effect of erosion. Runaway erosion

Read this and 13 more erosion articles that cover desertification, climate change, and much more

P.S.
Please spend a few minutes and send us your feedback as we strive to improve your viewing experience of both your blog and erosion website.
Many thanks.

Comments

0s0-Pa said…
Thanks for sharing the links to the other 13 resources on sediment control, I'll be sure to read up on some of them as this is a very important aspect to new businesses and construction.
-Jack

Erosion Control Forum.com

Erosion Control, and Nanotechnologies (NT)

Erosion Control Forum – Information on erosion control devices and resources Skip to content Abstract Nanotechnology (NT) The National Nanotechnology Initiative defines nanotechnology as understanding and controlling matter at dimensions between approximately 1 and 100 nanometers, where unique phenomena enable novel applications. Introduction Nanotechnology offers the potential to effectively treat contaminants in situ, avoiding excavation or the need to pump contaminated water out of the ground. The process begins with nanoparticles being injected into a contaminated aquifer via an injection well. Role of Nanotechnology Nanotechnology plays a crucial role in improving wind turbine performance...

Environmental Issues

Erosion Control Forum – Information on erosion control devices and resources Skip to content Bioventing Description Bioventing is an in situ remediation technology that uses microorganisms to biodegrade organic constituents adsorbed on soils in the unsaturated zone. Bioventing enhances the activity of indigenous bacteria and simulates the natural in situ biodegradation of hydrocarbons in soil by inducing air or oxygen flow into the unsaturated zone and, if necessary, by adding nutrients. During bioventing, oxygen may be supplied through direct air injection into residual contamination in soil. Bioventing primarily assists in the degradation of adsorbed fuel residuals, but also assists in the degradation of volatile organic compounds (VOCs) as vapors move slowly through biologically active...

Geogrid

Erosion Control Forum – Information on erosion control devices and resources Skip to content A geogrid is geosynthetic material used to reinforce soils and similar materials. Soils pull apart under tension. Compared to soil, geogrids are strong in tension. This fact allows them to transfer forces to a larger area of soil than would otherwise be the case.[citation needed]. Geogrids are commonly made of polymer materials, such as polyester, polyvinyl alcohol, polyethylene or polypropylene. They may be woven or knitted from yarns, heat-welded from strips of material, or produced by punching a regular pattern of holes in sheets of material, then stretched into a grid.Geogrid is typically used for soil reinforcement applications such as retaining walls, steepened slopes, embankments, sub-grade stabilization, embankments over soft ...