Skip to main content

Stabilizing Wet Soil with Lime Brings Amazing Results

ConstructionKnowedge Forum

PanzRule posted the information below on the ConstructionKnowledge Forum last week and I thought it was too good not to share further. I used lime on a fast-track factory project a few years ago with excellent results. We finished the project on time, which couldn’t have happened without the lime soil mixing. The experience shared by PansRule below should be read by everyone who has to work to control construction schedules and wet/frozen soils.

Post subject: Soil Modification/Stabilization by Panzrule 

I have been working on a site project that began in early October of 2009. If you can remember this winter here in Pennsylvania, we had a record winter in terms of snowfall. In conjunction with the snowfall we had what I would consider a cold winter. Now this is coming from a guy who spent the last 11 years working in an office who now the acting site project superintendent, project manager, and occasional equipment operator. So needless to say my opinion may be slightly skewed due to the time spent in the office becoming soft.

Because of the wet & frozen soil conditions throughout the winter and the owner’s need to maintain the project schedule soil modification was used. To be totally honest, I was skeptical of the process. I had never seen this process used and by the prices that I received for purchasing the material, I was petrified!

… read more

Comments

Henry Clark said…
It’s great to hear that the lime soil stabilization technique worked well for your fast-track factory project! Lime is indeed a valuable resource in construction, especially for soil stabilization and modification. It can help to dry out wet soils, reduce plasticity, and increase strength, which can be crucial for keeping construction projects on schedule despite challenging soil conditions.

Sharing knowledge and experiences like PanzRule’s on forums can be incredibly beneficial for professionals in the industry. It allows for the exchange of practical solutions and innovative methods that can lead to more efficient and successful projects. If you have any further insights or questions about construction techniques or project management, feel free to share them, and I’ll be glad to discuss them with you! ��
May 30, 2024 at 1:36 PM
Post a Comment

Popular posts from this blog

Erosion Control, and Nanotechnologies (NT)

Erosion Control Forum – Information on erosion control devices and resources Skip to content Abstract Nanotechnology (NT) The National Nanotechnology Initiative defines nanotechnology as understanding and controlling matter at dimensions between approximately 1 and 100 nanometers, where unique phenomena enable novel applications. Introduction Nanotechnology offers the potential to effectively treat contaminants in situ, avoiding excavation or the need to pump contaminated water out of the ground. The process begins with nanoparticles being injected into a contaminated aquifer via an injection well. Role of Nanotechnology Nanotechnology plays a crucial role in improving wind turbine performance...
2 comments
Read more

Environmental Issues

Erosion Control Forum – Information on erosion control devices and resources Skip to content Bioventing Description Bioventing is an in situ remediation technology that uses microorganisms to biodegrade organic constituents adsorbed on soils in the unsaturated zone. Bioventing enhances the activity of indigenous bacteria and simulates the natural in situ biodegradation of hydrocarbons in soil by inducing air or oxygen flow into the unsaturated zone and, if necessary, by adding nutrients. During bioventing, oxygen may be supplied through direct air injection into residual contamination in soil. Bioventing primarily assists in the degradation of adsorbed fuel residuals, but also assists in the degradation of volatile organic compounds (VOCs) as vapors move slowly through biologically active...
1 comment
Read more

Geogrid

Erosion Control Forum – Information on erosion control devices and resources Skip to content A geogrid is geosynthetic material used to reinforce soils and similar materials. Soils pull apart under tension. Compared to soil, geogrids are strong in tension. This fact allows them to transfer forces to a larger area of soil than would otherwise be the case.[citation needed]. Geogrids are commonly made of polymer materials, such as polyester, polyvinyl alcohol, polyethylene or polypropylene. They may be woven or knitted from yarns, heat-welded from strips of material, or produced by punching a regular pattern of holes in sheets of material, then stretched into a grid.Geogrid is typically used for soil reinforcement applications such as retaining walls, steepened slopes, embankments, sub-grade stabilization, embankments over soft ...
Post a Comment
Read more